Tender Detail

Buyer/Seller : Can be viewed by Subscribers
Ref. Number : 55125048 Tender Number : 2022_ZPHD_425674_9 Tender Prod. No : 2022_ZPHD_425674_9
Requirement : Supply of materials under mgnrega for turturikhanda gp, brick aggregate (single size)40 mm nominal size, tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), g i wire, portland cement, stone aggregate(single size)63 mm nominal size, stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 10 mm nominal size, fine sand, medium sand, coarse sand, stone screening type a (13.2 mm), stone screening type b (11.2mm) , river bed material , silver sand, good earth carrage, good quality fine sand supply, stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ) , sausage wire net , fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200 mm centres, finished smooth , rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, rcc pipe 1000 mm dia np -3 spigot, rcc pipe 1200 mm dia np - 3 spigot, rcc pipe 1800 mm dia np- 3 spigot, rcc pipe 600 mm dia np- 4 spigot, rcc pipe 900 mm dia np- 4 spigot, rcc pipe 1000 mm dia np- 4 spigot, rcc pipe 1200 mm dia np- 4 spigot, rcc pipe 1800 mm dia np- 4 spigot, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, coloured inter locking c.c. paver block , udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m , chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), pin vibrator, surface vibrator, generator 250 kva, water tanker 5000 ltr. capacity, bamboo, water tanker 5 to 6 kl capacity, generator 250 kva, generator 100 kva/125, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), empty gunny bag, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings , hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood , sisu/gamar wood , local sal wood, c.i. grating 100x100 mm, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin , slotted cowl (terminal guard) 75 mm dia, slotted cowl (terminal guard) 100 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, shower rose c.p.brass for 15 to 20 mm intel 150 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats 15 mm dia, h.p. or l.p. ball valve with polythene floats 20 mm dia, h.p. or l.p. ball valve with polythene floats 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm , vitreous china flat back wash basin 550x400 mm, vitreous china flat back wash basin 450x300 mm, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mmmm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, c.p.brass bibcock 15 mm , c.p. brass long body bibcock 15 mm, c.p. brass stop cock (concealed) 15 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is 2556, 15 mm ptmt bib cock, ptmt pillar cock, ptmt push cock 15 mm dia, ptmt - liquid soap container of 400 ml capacity, 32 mm dia polythene flush pipe, chromium plated stop cock (equivalent to code no. 513(a) & 513(b) & model - tropical / sumthing special of essco or similar brand)., chromium plated angular stop cock with wall flange (equivalent to code no. 5053 & model - florentine of jaquar or similar brand)., polythene bib cock / stop cock (hd) with metal/plastic inlet (emco / atlas or equivalent), sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of painting of c.i. brackets, supplying, fitting and fixing pillar cock of approved make cp pillar cock - 15 mm equivalent to code no. 507 & model tropical / sumthing special of essco or similar brand., 15 mm swan neck tap with left & right hand operating nob with aerator (equivalent to code no. 510, 510(a) and model - tropical / sumthing special of essco or similar brand)., p.v.c. connector 15 mm dia 600 mm long , polythene waste fittings complete 32mm, waste pipe, with pvc coupling at one end fitted with necessary clamps 900 mm long , towel rail (cp over brass )- 600 mm, two point nose steel handle, c.p. over brass waste fittings 32 mm , upvc plain y 110 mm dia, shower jet, corner urinal, check valve 32mm, check valve 40mm, check valve 50mm, reducing socket 20mm x 15mm, reducing socket 25mm x 20mm, reducing socket 25mm x 15mm, reducing elbow 25 mm x 20 mm, adhesive solvent cement, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia , g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia , chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 50 mm outer dia, coloured pedestal type w.c. pan 580x440 mm (european type) s trap, gi pipe 32 mm dia medium quality for underground works, gi pipe 40 mm dia medium quality for underground works, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia) [for concealed work] , cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia) [for concealed work], cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia) [for concealed work] , upvc plain y 75 mm dia, vitreous china foot rests 250x125x25 mm , polyethylene water storage tank with cover and suitable locking arrangemnet, nail, polythene sheet (150 gm per sqm), jute rope, coconut rope, poly rope, glue , green or blue medium shade pigment , coal tar, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer

Key Values

Document Fees : INR 5,000
EMD : INR 136,628
Tender Estimated Cost : INR 6,831,000
Closing Date : 15/12/2022
Location : West Bengal - India

Value Added Services

  • Get consortium partner
  • Get Winning Estimate
  • Track Tender Result
  • Get Subcontractors
  • Find Liaison Agency
  • Ask Expert

View similar Tenders

Disclaimer : Tender Tiger takes all possible care to ensure accurate & authentic tender information however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before they take submit their actual bid.