1. Sector : Municipal Corporations
Supply of materials for mgnregs works for (zone 2), kalimpong-i, block, stone aggregate(single size)63 mm nominal size, .stone aggregate (single size)50 mm nominal size, .stone aggregate(single size) 40 mm nominal size, .stone aggregate(single size)25 mm nominal size, .stone aggregate(single size)20 mm nominal size, .stone aggregate(single size) 12.5 mm nominal size, .stone aggregate(single size) 10 mm nominal size, .stone aggregate(single size) 06 mm nominal size, .cowdung, .bajiri, .bamboo 25 mm dia 2.5 meter long, .wire brush , .soft brush, .portland cement, .anodised aluminium butt hinges 125x75x4 mm, .anodised aluminium butt hinges 125x63x4xmm, .anodised aluminium butt hinges 100x75x4 mm, .anodised aluminium butt hinges 100x63x3.2 mm, .anodised aluminium butt hinges 100x63x4 mm, .anodised aluminium butt hinges 75x63x4 mm, .anodised aluminium butt hinges 75x63x3.2 mm, .anodised aluminium butt hinges 75x45x3.2 mm, .anodised aluminium sliding door bolt 300x16 mm, .anodised aluminium sliding door bolt 250x16 mm, .anodised aluminium tower bolt (barrel type)300x10 mm, .anodised aluminium tower bolt (barrel type) 250 x 10 mm, .anodised aluminium tower bolt (barrel type) 200x10 mm, .anodised aluminium tower bolt (barrel type) 150x10 mm, .anodised aluminium tower bolt (barrel type) 100x10 mm, .anodised aluminium handles 100 mm with plate 150 x 32 mm , .anodised aluminium handles 75 mm with plate 125 x 32 mm, .decorative plywood 4 mm, .unslaked lime, .synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, .ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, .ready mixed red oxide zinc chromatic on steel/ iron work, having voc content less than 250 gms/litre, .water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, .cement primer , .pink primer (for wood), .white cement based putty , .black japan, .enamel paint, .synthetic enamel paint in black or chocolate shade, .synthetic enamel paint in all shades except black or chocolate shade, .coarse sand (zone iii), .fine sand (zone iv), .galvanised steel plain sheets, .mild steel round bar 12 mm dia and below, .mild steel round bar 12 mm dia and below, .mild steel round bar above 12 mm dia, .mild steel round bar above 12 mm dia, .average rate of mild steel round bars for reinforcements, .average rate of mild steel round bars for reinforcements, .twisted steel/deformed bars, .twisted steel/deformed bars, .mild steel square bars, .mild steel square bars, .structural steel such as tees, angles, channels and r.s. joists , .flats up to 10 mm in thickness, .flats exceeding 10 mm in thickness, .mild steel plates, .steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11 and k12b etc., .galvanished steel barbed wire, .stone for masonry work, .stone for pitching 15 cm x 22.5 cm, .stone grit 6 mm and down size or pea sized gravel, .water proofing materials, .wire nails, .wire mesh (rabbit), .20 mm dia holding down bolts, .chequered terrazzo tiles 22 mm thick (medium shade), .brass bib-cock-15 mm dia, .brass bib-cock 20 mm dia, .brass stop-cock 15 mm dia, .brass stop-cock 20 mm dia, .vitreous china foot rests 250x130x30 mm, .c.i. grating 100x100 mm, .mirror of superior make glass 60x45 cm, .g.i. pipes 15 mm dia, .g.i. pipes 20 mm dia, .g.i. pipes 25 mm dia, .g.i. pipes 32 mm dia, .g.i. pipes 40 mm dia , .g.i pipes 50 mm dia, .g.i. back (jam) nuts 25 mm dia , .g.i.tees (equal) 25 mm, .g.i. union 15 mm nominal bore, .g.i. union 20 mm nominal bore, .g.i. union 25 mm nominal bore, .g.i. union 32 mm nominal bore, .g.i. union 40 mm nominal bore, .polyethylene water storage tank with cover and suitable locking arrangemnet, .rcc pipe 600 mm dia np- 3 spigot, .rcc pipe 900 mm dia np - 3 spigot, .rcc pipe 1000 mm dia np -3 spigot, .rcc pipe 1200 mm dia np - 3 spigot, .rcc pipe 600 mm dia np- 4 spigot, .rcc pipe 900 mm dia np- 4 spigot, .rcc pipe 1000 mm dia np- 4 spigot, .rcc pipe 1200 mm dia np- 4 spigot, .vitreous china squatting plate urinal, .20 mm dia gunmetal gate valve with wheel, .vitreous china flat back wash basin 630x450 mm, .vitreous china india type w.c. pan size 580 mm, .vitreous china orrisa type w.c. pan size 580 mm, .vitreous china pedestal type wate closet , .12 mm commercial ply, .common burnt clay f.p.s. (non modular) bricks class designation 7.5 (bricks), .galvanised steel corrugated sheets, .m.s. butt hinges 125x90x4 mm, .frosted glass sheet or nominal thickness 4 mm (weighing not less than 10 kg/sqm), .upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, .upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia , .upvc single equal tee (without door) 75x75x75 mm, .upvc single equal tee (without door) 110x110x110 mm, .upvc single equal tee (with door) 110x110x110 mmmm, .upvcbend 87.50, 110 mm bend, .upvc pipe clip 75 mm bend, .upvc pipe clip 110 mm bend, .ceramic glazed til...
|
Value :
4.46 Cr
*
|
44.63 Mn
*
|
Due Date :
6 Days to go
|
13/02/2023
|
TID :56565822
West Bengal
|
|
|
2. Sector : Municipal Corporations
Supply of materials for mgnregs works for (zone 2), Stone Aggregate(single size)63 mm nominal size, Stone Aggregate(single size)50 mm nominal size, Stone Aggregate(single size) 40 mm nominal size, Stone Aggregate(single size)25 mm nominal size, Stone Aggregate(single size)20 mm nominal size, Stone Aggregate(single size) 12.5 mm nominal size, Stone Aggregate(single size) 10 mm nominal size, Stone Aggregate(single size) 06 mm nominal size, Cowdung, Bajiri, Bamboo 25 mm dia 2.5 meter long, Wire brush , Soft brush, Portland Cement, Anodised Aluminium butt hinges 125x75x4 mm, Anodised Aluminium butt hinges 125x63x4xmm, Anodised Aluminium butt hinges 100x75x4 mm, Anodised Aluminium butt hinges 100x63x3.2 mm, Anodised Aluminium butt hinges 100x63x4 mm, Anodised Aluminium butt hinges 75x63x4 mm, Anodised Aluminium butt hinges 75x63x3.2 mm, Anodised Aluminium butt hinges 75x45x3.2 mm, Anodised Aluminium sliding door bolt 300x16 mm, Anodised Aluminium sliding door bolt 250x16 mm, Anodised Aluminium tower bolt (barrel type)300x10 mm, Anodised Aluminium tower bolt (barrel type) 250 x 10 mm, Anodised Aluminium tower bolt (barrel type) 200x10 mm, Anodised Aluminium tower bolt (barrel type) 150x10 mm, Anodised Aluminium tower bolt (barrel type) 100x10 mm, Anodised Aluminium handles 100 mm with plate 150 x 32 mm , Anodised Aluminium handles 75 mm with plate 125 x 32 mm, Decorative plywood 4 mm, Unslaked lime, Synthetic enamel paint, having VOC ( Volatile Organic Compound content less than 150 gm/liitre, Ready mixed pink or grey primer on wood work(hard and softwood) having VOC content less than 50 gms/litre, Ready mixed red oxide zinc chromatic on steel/ iron work, having VOC content less than 250 gms/litre, Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre, Cement Primer , Pink primer (for wood), White cement based putty , Black Japan, Enamel paint, Synthetic enamel paint in black or chocolate shade, Synthetic enamel paint in all shades except black or chocolate shade, Coarse sand (zone III), Fine sand (zone IV), Galvanised steel plain sheets, Mild steel round bar 12 mm dia and below, Mild steel round bar 12 mm dia and below, Mild Steel round bar above 12 mm dia, Mild Steel round bar above 12 mm dia, Average rate of mild steel round bars for reinforcements, Average rate of mild steel round bars for reinforcements, Twisted steel/deformed bars, Twisted steel/deformed bars, Mild steel square bars, Mild steel square bars, Structural steel such as tees, angles, channels and R.S. joists , Flats up to 10 mm in thickness, Flats exceeding 10 mm in thickness, Mild steel plates, Steel glazed door, window/ ventilator, all members viz, F7D, F4B, K11 and K12B etc., Galvanished steel barbed wire, Stone for masonry work, Stone for pitching 15 cm x 22.5 cm, Stone grit 6 mm and down size or pea sized gravel, Water proofing materials, Wire nails, Wire mesh (rabbit), 20 mm dia holding down bolts, Chequered terrazzo tiles 22 mm thick (medium shade), Brass bib-cock-15 mm dia, Brass bib-cock 20 mm dia, Brass stop-cock 15 mm dia, Brass stop-cock 20 mm dia, Vitreous china foot rests 250x130x30 mm, C.I. Grating 100x100 mm, Mirror of superior make glass 60x45 cm, G.I. pipes 15 mm dia, G.I. pipes 20 mm dia, G.I. pipes 25 mm dia, G.I. pipes 32 mm dia, G.I. pipes 40 mm dia , G.I pipes 50 mm dia, G.I. back (jam) nuts 25 mm dia , G.I.tees (equal) 25 mm, G.I. Union 15 mm nominal bore, G.I. Union 20 mm nominal bore, G.I. Union 25 mm nominal bore, G.I. Union 32 mm nominal bore, G.I. Union 40 mm nominal bore, Polyethylene water storage tank with cover and suitable locking arrangemnet, RCC pipe 600 mm dia NP- 3 spigot, RCC pipe 900 mm dia NP - 3 spigot, RCC pipe 1000 mm dia NP -3 spigot, RCC pipe 1200 mm dia NP - 3 spigot, RCC pipe 600 mm dia NP- 4 spigot, RCC pipe 900 mm dia NP- 4 spigot, RCC pipe 1000 mm dia NP- 4 spigot, RCC pipe 1200 mm dia NP- 4 spigot, Vitreous china squatting plate urinal, 20 mm dia Gunmetal gate valve with wheel, Vitreous China flat back wash basin 630x450 mm, Vitreous china India type w.c. pan size 580 mm, Vitreous China orrisa type w.c. pan size 580 mm, Vitreous china pedestal type wate closet , 12 mm commercial ply, Common burnt clay F.P.S. (non modular) bricks class designation 7.5 (Bricks), Galvanised steel corrugated sheets, M.S. Butt hinges 125x90x4 mm, Frosted glass sheet or nominal thickness 4 mm (weighing not less than 10 kg/sqm), uPVC pipes (working pressure 4 kg /cm2 ) Single socketed pipe 75 mm dia, uPVC pipes (working pressure 4 Kg / cm2 ) Single socketed pipe 110 mm dia , uPVC single equal Tee (without door) 75x75x75 mm, uPVC single equal Tee (without door) 110x110x110 mm, uPVC single equal Tee (with door) 110x110x110 mmmm, UPVCbend 87.50, 110 mm bend, UPVC pipe clip 75 mm bend, UPVC pipe clip 110 mm bend, Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, Ceramic Glazed Tiles Ist qualit...
|
Value :
3.72 Cr
*
|
37.28 Mn
*
|
Due Date :
6 Days to go
|
13/02/2023
|
TID :56557275
West Bengal
|
|
|
3. Sector : Municipal Corporations
Supply of materials for mgnregs works for (zone 5) (1) rongo g.p. (2) patengodak g.p. stone aggregate(single size)63 mm nominal size, stone aggregate(single size)50 mm nominal size, stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)25 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 12.5 mm nominal size, stone aggregate(single size) 10 mm nominal size, stone aggregate(single size) 06 mm nominal size, cowdung, bajiri, bamboo 25 mm dia 2.5 meter long, wire brush , soft brush, portland cement, anodised aluminium butt hinges 125x75x4 mm, anodised aluminium butt hinges 125x63x4xmm, anodised aluminium butt hinges 100x75x4 mm, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 100x63x4 mm, anodised aluminium butt hinges 75x63x4 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, anodised aluminium sliding door bolt 300x16 mm, anodised aluminium sliding door bolt 250x16 mm, anodised aluminium tower bolt (barrel type)300x10 mm, anodised aluminium tower bolt (barrel type) 250 x 10 mm, anodised aluminium tower bolt (barrel type) 200x10 mm, anodised aluminium tower bolt (barrel type) 150x10 mm, anodised aluminium tower bolt (barrel type) 100x10 mm, anodised aluminium handles 100 mm with plate 150 x 32 mm , anodised aluminium handles 75 mm with plate 125 x 32 mm, decorative plywood 4 mm, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, ready mixed red oxide zinc chromatic on steel/ iron work, having voc content less than 250 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, cement primer , pink primer (for wood), white cement based putty , black japan, enamel paint, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, mild steel round bar 12 mm dia and below, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, twisted steel/deformed bars, mild steel square bars, mild steel square bars, structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness, flats exceeding 10 mm in thickness, mild steel plates, steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11 and k12b etc., galvanished steel barbed wire, stone for masonry work, stone for pitching 15 cm x 22.5 cm, stone grit 6 mm and down size or pea sized gravel, water proofing materials, wire nails, wire mesh (rabbit), 20 mm dia holding down bolts, chequered terrazzo tiles 22 mm thick (medium shade), brass bib-cock-15 mm dia, brass bib-cock 20 mm dia, brass stop-cock 15 mm dia, brass stop-cock 20 mm dia, vitreous china foot rests 250x130x30 mm, c.i. grating 100x100 mm, mirror of superior make glass 60x45 cm, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia , g.i pipes 50 mm dia, g.i. back (jam) nuts 25 mm dia , g.i.tees (equal) 25 mm, g.i. union 15 mm nominal bore, g.i. union 20 mm nominal bore, g.i. union 25 mm nominal bore, g.i. union 32 mm nominal bore, g.i. union 40 mm nominal bore, polyethylene water storage tank with cover and suitable locking arrangemnet, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, rcc pipe 1000 mm dia np -3 spigot, rcc pipe 1200 mm dia np - 3 spigot, rcc pipe 600 mm dia np- 4 spigot, rcc pipe 900 mm dia np- 4 spigot, rcc pipe 1000 mm dia np- 4 spigot, rcc pipe 1200 mm dia np- 4 spigot, vitreous china squatting plate urinal, 20 mm dia gunmetal gate valve with wheel, vitreous china flat back wash basin 630x450 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, vitreous china pedestal type wate closet , 12 mm commercial ply, common burnt clay f.p.s. (non modular) bricks class designation 7.5 (bricks), galvanised steel corrugated sheets, m.s. butt hinges 125x90x4 mm, frosted glass sheet or nominal thickness 4 mm (weighing not less than 10 kg/sqm), upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia , upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 110x110x110 mmmm, upvcbend 87.50, 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green blac...
|
Value :
3.51 Cr
*
|
35.17 Mn
*
|
Due Date :
6 Days to go
|
13/02/2023
|
TID :56587140
West Bengal
|
|
|
4. Sector : Municipal Corporations
Supply of materials for mgnregs works for (zone 3) -i block stone aggregate(single size)63 mm nominal size, stone aggregate(single size)50 mm nominal size, stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)25 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 12.5 mm nominal size, stone aggregate(single size) 10 mm nominal size, stone aggregate(single size) 06 mm nominal size, cowdung, bajiri, bamboo 25 mm dia 2.5 meter long, wire brush , soft brush, portland cement, anodised aluminium butt hinges 125x75x4 mm, anodised aluminium butt hinges 125x63x4xmm, anodised aluminium butt hinges 100x75x4 mm, anodised aluminium butt hinges 100x63x3.2 mm, anodised aluminium butt hinges 100x63x4 mm, anodised aluminium butt hinges 75x63x4 mm, anodised aluminium butt hinges 75x63x3.2 mm, anodised aluminium butt hinges 75x45x3.2 mm, anodised aluminium sliding door bolt 300x16 mm, anodised aluminium sliding door bolt 250x16 mm, anodised aluminium tower bolt (barrel type)300x10 mm, anodised aluminium tower bolt (barrel type) 250 x 10 mm, anodised aluminium tower bolt (barrel type) 200x10 mm, anodised aluminium tower bolt (barrel type) 150x10 mm, anodised aluminium tower bolt (barrel type) 100x10 mm, anodised aluminium handles 100 mm with plate 150 x 32 mm , anodised aluminium handles 75 mm with plate 125 x 32 mm, decorative plywood 4 mm, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, ready mixed red oxide zinc chromatic on steel/ iron work, having voc content less than 250 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, cement primer , pink primer (for wood), white cement based putty , black japan, enamel paint, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, mild steel round bar 12 mm dia and below, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, twisted steel/deformed bars, mild steel square bars, mild steel square bars, structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness, flats exceeding 10 mm in thickness, mild steel plates, steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11 and k12b etc., galvanished steel barbed wire, stone for masonry work, stone for pitching 15 cm x 22.5 cm, stone grit 6 mm and down size or pea sized gravel, water proofing materials, wire nails, wire mesh (rabbit), 20 mm dia holding down bolts, chequered terrazzo tiles 22 mm thick (medium shade), brass bib-cock-15 mm dia, brass bib-cock 20 mm dia, brass stop-cock 15 mm dia, brass stop-cock 20 mm dia, vitreous china foot rests 250x130x30 mm, c.i. grating 100x100 mm, mirror of superior make glass 60x45 cm, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia , g.i pipes 50 mm dia, g.i. back (jam) nuts 25 mm dia , g.i.tees (equal) 25 mm, g.i. union 15 mm nominal bore, g.i. union 20 mm nominal bore, g.i. union 25 mm nominal bore, g.i. union 32 mm nominal bore, g.i. union 40 mm nominal bore, polyethylene water storage tank with cover and suitable locking arrangemnet, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, rcc pipe 1000 mm dia np -3 spigot, rcc pipe 1200 mm dia np - 3 spigot, rcc pipe 600 mm dia np- 4 spigot, rcc pipe 900 mm dia np- 4 spigot, rcc pipe 1000 mm dia np- 4 spigot, rcc pipe 1200 mm dia np- 4 spigot, vitreous china squatting plate urinal, 20 mm dia gunmetal gate valve with wheel, vitreous china flat back wash basin 630x450 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, vitreous china pedestal type wate closet , 12 mm commercial ply, common burnt clay f.p.s. (non modular) bricks class designation 7.5 (bricks), galvanised steel corrugated sheets, m.s. butt hinges 125x90x4 mm, frosted glass sheet or nominal thickness 4 mm (weighing not less than 10 kg/sqm), upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia , upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 110x110x110 mmmm, upvcbend 87.50, 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles is...
|
Value :
3.51 Cr
*
|
35.12 Mn
*
|
Due Date :
6 Days to go
|
13/02/2023
|
TID :56632265
West Bengal
|
|
|
|
|
7. Sector : Municipal Corporations
Septage treatment plant munnar gramapanchayat 2.31 clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of the girth up to 30 cm measured at height of 1.00 m above ground level and removal of rubbish up to distance of 50.00 m outside the periphery of the area cleared, 2.6.1earth work in excavation by mechanical means (hydraulic excavator) manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m. disposed earth to be levelled and neatly dressed all kind of soil., 2.26.1extra for every additional lift of 1.5m or part there of in excavation/ banking excavated or stacked materials. all kind of soils, 4.1.8 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work up to plinth level 148 (1 cement 4 coarse sand 8 graded stone aggregate 40 nominal size), 7.1.1 random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1612 (1 cement 6 coarse sand 12 graded stone aggregate 20 mm nominal size), up to plinth level with cement mortar 16 (1 cement 6 coarse sand), 6.4.1 brickwork with common burnt clay fps (non-modular) bricks of class designation 7.5 in super structure above plinth level up to floor v level in all shapes and sizes in cement mortar 1 4 (1 cement 4 coarse sand), 5.9.1 centering and shuttering including strutting, etc. and removal of form for foundations, footing, bases of columns, etc for mass concrete, 5.9.2 centering and shuttering including strutting, etc. and removal of form for wall (any thickness) including attached pilasters, buttresses, plinth and string courses etc. , 5.9.3 centering and shuttering including strutting, etc. and removal of form for slab, 5.37.1 providing and laying in position ready mixed m-25 grade concrete for reinforced cement concrete work using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of r.m.c from transit mixer to site of laying, including the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per is9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer-in–charge. note-cement content considered in this item is @ 330 kg/cum. excess/less cement used as per design mix is payable/ recoverable separately. all work upto plinth level, 5.37.2providing and laying in position ready mixed m-25 grade concrete for reinforced cement concrete work using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of r.m.c from transit mixer to site of laying, including the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per is9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer-in–charge. note-cement content considered in this item is @ 330 kg/cum. excess/less cement used as per design mix is payable/ recoverable separately. all works above plinth level upto floor v level, 5.22.6 steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth level thermo-mechanically treated bars., 13.16.1 6 mm cement plaster of mix 13 (1 cement 3 fine sand), 13.37.1 white washing with lime to give an even shade new work (three or more coats), 13.44.1 finishing walls with water proofing cement paint of required shade new work (two or more coats applied @ 3.84 kg/10 sqm), 13.47.1 finishing walls with premium acrylic smooth exterior paint with silicon additives of required shade new work (2 or more coats applied @ 1.43 l/10 m2 over and including priming coat of exterior primer applied @ 2.20 kg/ 10 m2., 4.12 extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification, 12.47.1 providing & fixing uv stabilised fibre glass reinforced plastic sheet rooting up to any pitch, including fixing with polymer coated 'j' or 'l' hooks, bolts & nuts 8 mm dia g.i plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. the sheets shall be manufactured out of 2400 tex panel rovings incorporating minimum 0.3% ultra-violet stabiliser in resin system under approxir...
|
Value :
INR 3.07 Cr
*
|
INR 30.76 Mn
*
|
Due Date :
8 Days to go
|
15/02/2023
|
TID :57071247
Kerala
|
|
|
8. Sector : Municipal Corporations
Supply of Materials for MGNREGS works for (Zone 5), Stone Aggregate(single size)63 mm nominal size, Stone Aggregate(single size)50 mm nominal size, Stone Aggregate(single size) 40 mm nominal size, Stone Aggregate(single size)25 mm nominal size, Stone Aggregate(single size)20 mm nominal size, Stone Aggregate(single size) 12.5 mm nominal size, Stone Aggregate(single size) 10 mm nominal size, Stone Aggregate(single size) 06 mm nominal size, Cowdung, Bajiri, Bamboo 25 mm dia 2.5 meter long, Wire brush , Soft brush, Portland Cement, Anodised Aluminium butt hinges 125x75x4 mm, Anodised Aluminium butt hinges 125x63x4xmm, Anodised Aluminium butt hinges 100x75x4 mm, Anodised Aluminium butt hinges 100x63x3.2 mm, Anodised Aluminium butt hinges 100x63x4 mm, Anodised Aluminium butt hinges 75x63x4 mm, Anodised Aluminium butt hinges 75x63x3.2 mm, Anodised Aluminium butt hinges 75x45x3.2 mm, Anodised Aluminium sliding door bolt 300x16 mm, Anodised Aluminium sliding door bolt 250x16 mm, Anodised Aluminium tower bolt (barrel type)300x10 mm, Anodised Aluminium tower bolt (barrel type) 250 x 10 mm, Anodised Aluminium tower bolt (barrel type) 200x10 mm, Anodised Aluminium tower bolt (barrel type) 150x10 mm, Anodised Aluminium tower bolt (barrel type) 100x10 mm, Anodised Aluminium handles 100 mm with plate 150 x 32 mm , Anodised Aluminium handles 75 mm with plate 125 x 32 mm, Decorative plywood 4 mm, Unslaked lime, Synthetic enamel paint, having VOC ( Volatile Organic Compound content less than 150 gm/liitre, Ready mixed pink or grey primer on wood work(hard and softwood) having VOC content less than 50 gms/litre, Ready mixed red oxide zinc chromatic on steel/ iron work, having VOC content less than 250 gms/litre, Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre, Cement Primer , Pink primer (for wood), White cement based putty , Black Japan, Enamel paint, Synthetic enamel paint in black or chocolate shade, Synthetic enamel paint in all shades except black or chocolate shade, Coarse sand (zone III), Fine sand (zone IV), Galvanised steel plain sheets, Mild steel round bar 12 mm dia and below, Mild steel round bar 12 mm dia and below, Mild Steel round bar above 12 mm dia, Mild Steel round bar above 12 mm dia, Average rate of mild steel round bars for reinforcements, Average rate of mild steel round bars for reinforcements, Twisted steel/deformed bars, Twisted steel/deformed bars, Mild steel square bars, Mild steel square bars, Structural steel such as tees, angles, channels and R.S. joists , Flats up to 10 mm in thickness, Flats exceeding 10 mm in thickness, Mild steel plates, Steel glazed door, window/ ventilator, all members viz, F7D, F4B, K11 and K12B etc., Galvanished steel barbed wire, Stone for masonry work, Stone for pitching 15 cm x 22.5 cm, Stone grit 6 mm and down size or pea sized gravel, Water proofing materials, Wire nails, Wire mesh (rabbit), 20 mm dia holding down bolts, Chequered terrazzo tiles 22 mm thick (medium shade), Brass bib-cock-15 mm dia, Brass bib-cock 20 mm dia, Brass stop-cock 15 mm dia, Brass stop-cock 20 mm dia, Vitreous china foot rests 250x130x30 mm, C.I. Grating 100x100 mm, Mirror of superior make glass 60x45 cm, G.I. pipes 15 mm dia, G.I. pipes 20 mm dia, G.I. pipes 25 mm dia, G.I. pipes 32 mm dia, G.I. pipes 40 mm dia , G.I pipes 50 mm dia, G.I. back (jam) nuts 25 mm dia , G.I.tees (equal) 25 mm, G.I. Union 15 mm nominal bore, G.I. Union 20 mm nominal bore, G.I. Union 25 mm nominal bore, G.I. Union 32 mm nominal bore, G.I. Union 40 mm nominal bore, Polyethylene water storage tank with cover and suitable locking arrangemnet, RCC pipe 600 mm dia NP- 3 spigot, RCC pipe 900 mm dia NP - 3 spigot, RCC pipe 1000 mm dia NP -3 spigot, RCC pipe 1200 mm dia NP - 3 spigot, RCC pipe 600 mm dia NP- 4 spigot, RCC pipe 900 mm dia NP- 4 spigot, RCC pipe 1000 mm dia NP- 4 spigot, RCC pipe 1200 mm dia NP- 4 spigot, Vitreous china squatting plate urinal, 20 mm dia Gunmetal gate valve with wheel, Vitreous China flat back wash basin 630x450 mm, Vitreous china India type w.c. pan size 580 mm, Vitreous China orrisa type w.c. pan size 580 mm, Vitreous china pedestal type wate closet , 12 mm commercial ply, Common burnt clay F.P.S. (non modular) bricks class designation 7.5 (Bricks), Galvanised steel corrugated sheets, M.S. Butt hinges 125x90x4 mm, Frosted glass sheet or nominal thickness 4 mm (weighing not less than 10 kg/sqm), uPVC pipes (working pressure 4 kg /cm2 ) Single socketed pipe 75 mm dia, uPVC pipes (working pressure 4 Kg / cm2 ) Single socketed pipe 110 mm dia , uPVC single equal Tee (without door) 75x75x75 mm, uPVC single equal Tee (without door) 110x110x110 mm, uPVC single equal Tee (with door) 110x110x110 mmmm, UPVCbend 87.50, 110 mm bend, UPVC pipe clip 75 mm bend, UPVC pipe clip 110 mm bend, Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, Ceramic Glazed Tiles Ist qualit...
|
Value :
2.79 Cr
*
|
27.95 Mn
*
|
Due Date :
6 Days to go
|
13/02/2023
|
TID :56585857
West Bengal
|
|
|
9. Sector : Municipal Corporations
Supply of materials for mgnregs works for (zone 3) (1) nim g.p. (2) pokhrebong g.p, stone aggregate (single size)63 mm nominal size, .stone aggregate(single size)50 mm nominal size, .stone aggregate(single size) 40 mm nominal size, .stone aggregate(single size)25 mm nominal size, .stone aggregate(single size)20 mm nominal size, .stone aggregate(single size) 12.5 mm nominal size, .stone aggregate(single size) 10 mm nominal size, .stone aggregate(single size) 06 mm nominal size, .cowdung, .bajiri, .bamboo 25 mm dia 2.5 meter long, .wire brush , .soft brush, .portland cement, .anodised aluminium butt hinges 125x75x4 mm, .anodised aluminium butt hinges 125x63x4xmm, .anodised aluminium butt hinges 100x75x4 mm, .anodised aluminium butt hinges 100x63x3.2 mm, .anodised aluminium butt hinges 100x63x4 mm, .anodised aluminium butt hinges 75x63x4 mm, .anodised aluminium butt hinges 75x63x3.2 mm, .anodised aluminium butt hinges 75x45x3.2 mm, .anodised aluminium sliding door bolt 300x16 mm, .anodised aluminium sliding door bolt 250x16 mm, .anodised aluminium tower bolt (barrel type)300x10 mm, .anodised aluminium tower bolt (barrel type) 250 x 10 mm, .anodised aluminium tower bolt (barrel type) 200x10 mm, .anodised aluminium tower bolt (barrel type) 150x10 mm, .anodised aluminium tower bolt (barrel type) 100x10 mm, .anodised aluminium handles 100 mm with plate 150 x 32 mm , .anodised aluminium handles 75 mm with plate 125 x 32 mm, .decorative plywood 4 mm, .unslaked lime, .synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, .ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, .ready mixed red oxide zinc chromatic on steel/ iron work, having voc content less than 250 gms/litre, .water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, .cement primer , .pink primer (for wood), .white cement based putty , .black japan, .enamel paint, .synthetic enamel paint in black or chocolate shade, .synthetic enamel paint in all shades except black or chocolate shade, .coarse sand (zone iii), .fine sand (zone iv), .galvanised steel plain sheets, .mild steel round bar 12 mm dia and below, .mild steel round bar 12 mm dia and below, .mild steel round bar above 12 mm dia, .mild steel round bar above 12 mm dia, .average rate of mild steel round bars for reinforcements, .average rate of mild steel round bars for reinforcements, .twisted steel/deformed bars, .twisted steel/deformed bars, .mild steel square bars, .mild steel square bars, .structural steel such as tees, angles, channels and r.s. joists , .flats up to 10 mm in thickness, .flats exceeding 10 mm in thickness, .mild steel plates, .steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11 and k12b etc., .galvanished steel barbed wire, .stone for masonry work, .stone for pitching 15 cm x 22.5 cm, .stone grit 6 mm and down size or pea sized gravel, .water proofing materials, .wire nails, .wire mesh (rabbit), .20 mm dia holding down bolts, .chequered terrazzo tiles 22 mm thick (medium shade), .brass bib-cock-15 mm dia, .brass bib-cock 20 mm dia, .brass stop-cock 15 mm dia, .brass stop-cock 20 mm dia, .vitreous china foot rests 250x130x30 mm, .c.i. grating 100x100 mm, .mirror of superior make glass 60x45 cm, .g.i. pipes 15 mm dia, .g.i. pipes 20 mm dia, .g.i. pipes 25 mm dia, .g.i. pipes 32 mm dia, .g.i. pipes 40 mm dia , .g.i pipes 50 mm dia, .g.i. back (jam) nuts 25 mm dia , .g.i.tees (equal) 25 mm, .g.i. union 15 mm nominal bore, .g.i. union 20 mm nominal bore, .g.i. union 25 mm nominal bore, .g.i. union 32 mm nominal bore, .g.i. union 40 mm nominal bore, .polyethylene water storage tank with cover and suitable locking arrangemnet, .rcc pipe 600 mm dia np- 3 spigot, .rcc pipe 900 mm dia np - 3 spigot, .rcc pipe 1000 mm dia np -3 spigot, .rcc pipe 1200 mm dia np - 3 spigot, .rcc pipe 600 mm dia np- 4 spigot, .rcc pipe 900 mm dia np- 4 spigot, .rcc pipe 1000 mm dia np- 4 spigot, .rcc pipe 1200 mm dia np- 4 spigot, .vitreous china squatting plate urinal, .20 mm dia gunmetal gate valve with wheel, .vitreous china flat back wash basin 630x450 mm, .vitreous china india type w.c. pan size 580 mm, .vitreous china orrisa type w.c. pan size 580 mm, .vitreous china pedestal type wate closet , .12 mm commercial ply, .common burnt clay f.p.s. (non modular) bricks class designation 7.5 (bricks), .galvanised steel corrugated sheets, .m.s. butt hinges 125x90x4 mm, .frosted glass sheet or nominal thickness 4 mm (weighing not less than 10 kg/sqm), .upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, .upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia , .upvc single equal tee (without door) 75x75x75 mm, .upvc single equal tee (without door) 110x110x110 mm, .upvc single equal tee (with door) 110x110x110 mmmm, .upvcbend 87.50, 110 mm bend, .upvc pipe clip 75 mm bend, .upvc pipe clip 110 mm bend, .cer...
|
Value :
2.16 Cr
*
|
21.60 Mn
*
|
Due Date :
6 Days to go
|
13/02/2023
|
TID :56586441
West Bengal
|
|
|
10. Sector : Railways Transport Services
Lko construction of two new godown shed (size-20x10 mtr) with the provision of 40 nos of heavy duty steel rack of size (h-2.1mxl-2.0mxw-1m) having 6 shelves, made of mild steel angle and 16 swg gauge crs sheet treated with one coat of anticorrosive primer & finished within 2 coat of enamel paint or equivalent quantity for electric loco spares in store depot/amv under smm/amv, renovation of canteen & time-office and repairing of complete drainage system in dsl shed-alambagh in the section of sse/w/amv/east in connection with creation of facilities for maintenace of electric locomotive at diesel shed, alambagh, lucknow, heavy repair to up yard running room, lucknow, heavy repair to service buildings, barracks, community toilets, armoury, dog squad, canteen, staff quarters etc in rpf reserve line (38 btn) and heavy repair to bungalow no. l-32, l-33, d-18, d-19, l-67, e-20a, d-15, d-2, iv-1, 2, 3, 4, d-15, d-25, iv-40c, d, l-68a, b, iv-35, iv-24, iv-25b, l-14, l-19, l-3b, l-18a, b, l-63a, b, t-2, ww-1a, b, l-9 (a, b), l-10 (a, b), l-13 (a, b), l- 16b, l-17 b including their outhouses, quarter no. iii-39 (a to d), iii-40 (a to d), iii-41 (a, b), l-71 (a, b), ec-14a, iii-1, 2, 3 (a, b), elc-3a, b, iii-35 (a to c), iii-26 (a to d), iii-27 (a to
|
Value :
INR 1.99 Cr
*
|
INR 19.91 Mn
*
|
Due Date :
6 Days to go
|
13/02/2023
|
TID :56399700
Uttar Pradesh
|
|
|